Everhot products offer a blend of functionality and efficiency for residential and commercial use. The brand's product line includes electric stoves, water heaters, room heaters, and kitchen appliances. Each of these products requires specific installation procedures, electrical requirements, and safety considerations. This article provides a detailed overview of Everhot installation instructions, focusing on electric stoves, room heaters, and kitchen appliances based on the documentation available.
Introduction
Everhot appliances are designed to be user-friendly while ensuring optimal performance. Installation, however, must be approached with care to ensure the safety and longevity of the appliance. The documentation outlines the necessary steps for setting up various models, including electrical socket requirements, positioning, and setup procedures. This article draws from official manuals, installation guides, and technical specifications available for different Everhot models.
Everhot Electric Stove Installation
The Everhot Electric Stove is a combination room heater and oven appliance. It is intended for indoor use and provides both heating and occasional cooking capabilities. The stove is equipped with a mechanical thermostat and a 1.5kW heating element for room heating. The oven compartment, behind a cast iron door, has a 20-liter capacity.
Pre-Installation Checklist
Before installing the Everhot Electric Stove, it is crucial to inspect the following components:
- The Everhot Electric Stove Room Heater/Oven combo
- Room heater shell
- Top Grille Plate
- Oven Shelf
- 1.5m Power Cord with UK 3 Pin Plug (BS1363 Type G)
- Instruction Booklet
These items should be checked for damage and completeness. The installation should be carried out on a solid surface.
Electrical Requirements
The stove requires a 13A mains socket (BS1363 Type G). The power cable is 1.5 meters long, so the socket must be within reach of the appliance's intended position. It is important to note that the socket must not be located directly above the heater, nor should the power cord be resting on the top or wrapped around the side of the heater.
Installation Process
- Positioning the Stove: Place the stove on a solid and level surface.
- Socket Placement: Ensure the electrical socket is within reach and correctly positioned as per the electrical requirements.
- Connecting the Power Cord: Plug the 3-pin plug into the socket. Verify that the cord is not bent or damaged.
- Testing the Appliance: Once connected, test the appliance to ensure the thermostat and heating functions work correctly.
The stove is thermostatically controlled, with the heat output increasing in line with the oven temperature. A chart of approximate oven temperatures is typically provided in the instruction booklet.
Everhot Room Heater Installation
The Everhot room heater models, including the EVH 90 Plus, EVH 100 Plus, and EVH 110i, are primarily designed as heat storage room heaters with optional cooking functions. These models are not intended to serve as the sole or primary heating source in a residence.
Electrical Requirements for Room Heaters
The installation of Everhot room heaters requires specific electrical considerations:
- A standard 13A socket is required for the base unit.
- Induction models may require a separate socket for the hob. For example, the EVH 110i requires two 13A sockets (or a double socket).
- On larger models, it is advisable to use two single sockets. Everhot recommends consulting their technical documentation for further guidance.
Socket Placement Considerations
Socket placement can be a challenge, especially in already furnished spaces. The power cable typically exits the right-hand side of the cooker. Therefore, the socket must be positioned either to the left or right of the appliance, not behind it.
In some cases, users may need to modify their kitchen layout to accommodate the socket. This may involve cutting a hole in a side panel, removing a drawer, or modifying the back panel to position the socket correctly.
Everhot Kitchen Appliance Installation
Everhot kitchen appliances include models such as the EVH 100i, EVH 120i, and EVH 150i. These units combine room heating and cooking functions, making them versatile for home use.
Installation Steps
Installation of Everhot kitchen appliances involves the following steps:
- Pre-Installation Inspection: Check for all components, including the appliance, power cord, and instruction manual.
- Electrical Setup: Ensure the required number of 13A sockets is available and correctly positioned.
- Positioning the Appliance: Place the appliance on a solid surface and ensure the power cord is not obstructed.
- Connecting to Power: Plug the appliance into the designated sockets.
- Testing: Turn on the appliance and verify that all functions are working correctly.
Electrical Considerations
The number of sockets required varies by model. For example:
- The EVH 110i requires two 13A sockets.
- Larger models may require separate sockets for the induction hob and the main unit.
Everhot provides detailed installation instructions for each model, which can be found in their manuals. These documents include specifications, wiring diagrams, and safety guidelines.
Everhot Water Heater Installation
Everhot water heaters, including models like the 211220, 271 SERIES, and 274 series, are designed for domestic hot water supply. These units require careful installation to ensure safe and efficient operation.
Pre-Installation Requirements
Before installing an Everhot water heater, the following items should be checked:
- The water heater unit
- Installation instructions and technical manual
- Necessary tools for installation
- Electrical and plumbing connections
The technical manuals for these units typically include detailed wiring diagrams, plumbing connections, and safety precautions.
Installation Process
- Electrical Connections: Connect the water heater to the appropriate power supply. The voltage and amperage requirements vary by model and should be specified in the technical manual.
- Plumbing Setup: Ensure that the cold water supply and hot water output are correctly connected. The unit should be installed in a location that allows for easy access to valves and controls.
- Mounting the Unit: Secure the water heater in a stable position. Some models may require wall mounting or support brackets.
- Testing the System: Once installed, test the water heater to ensure it heats water efficiently and safely.
Everhot Heating System Installation
Everhot heating systems, such as the 1000/BL1 and 150/BL1 series, are designed for more complex heating applications. These systems require professional installation and are typically used in larger residential or commercial settings.
Installation Requirements
- A dedicated electrical circuit with the correct amperage and voltage
- Proper ventilation for heat dissipation
- Space for maintenance and access to controls
Technical manuals for these systems provide detailed instructions on electrical connections, ventilation requirements, and maintenance procedures.
Installation Process
- Electrical Wiring: Connect the heating system to the main power supply using the specified circuit breaker and wiring.
- Ventilation Setup: Ensure that the unit has adequate ventilation to prevent overheating.
- Mounting and Support: Secure the heating system in place using the recommended mounting brackets or supports.
- Control Panel Installation: Install the control panel and connect it to the heating system for temperature regulation.
- Testing and Commissioning: Test the system to ensure it functions as intended and make any necessary adjustments.
Safety and Maintenance Considerations
Everhot appliances are designed with safety in mind. However, proper installation and regular maintenance are essential for safe and efficient operation.
Safety Guidelines
- Always follow the manufacturer's installation instructions.
- Do not attempt to modify the appliance or its components.
- Use only the specified electrical sockets and power cords.
- Keep the appliance away from flammable materials.
- Do not use the appliance if it is damaged or malfunctioning.
Maintenance Tips
- Clean the appliance regularly to prevent dust buildup.
- Check the power cord and sockets for damage.
- Inspect the thermostat and controls for proper function.
- Refer to the technical manual for model-specific maintenance procedures.
Conclusion
Everhot appliances offer a versatile solution for heating and cooking needs. Proper installation is crucial for ensuring the safety and efficiency of these units. Whether installing an electric stove, room heater, kitchen appliance, or water heater, following the manufacturer's guidelines is essential. Users should consult the technical manuals and installation instructions provided by Everhot for model-specific details. By adhering to these guidelines, users can ensure their Everhot appliances operate safely and effectively for years to come.