Installation guides are essential for ensuring the safe and effective use of hardware and building materials. Everbilt, a brand distributed through Home Depot, provides detailed instructions for a range of products, including drawer slides, tile backer boards, and closet organizer systems. These instructions are designed to assist users in correctly assembling and installing products for both frameless and face-frame cabinetry, as well as for subfloor applications in tile installation.
The provided documentation covers a variety of installation scenarios, including the use of drawer slides for 18-inch and 21-inch deep drawers, tile backer board installation over wood subfloors, and modular closet systems with adjustable shelving. Each product includes step-by-step guidance, dimensional specifications, and safety notes to help users complete their projects accurately. The manuals also highlight the importance of pre-installation planning, tool requirements, and proper hardware selection to ensure compatibility and long-term durability.
This article provides a comprehensive overview of the key installation instructions and technical details found in the Everbilt documentation, focusing on the products’ specifications, compatibility, and best practices for installation.
Everbilt Drawer Slide Installation for Cabinetry
Everbilt drawer slides are designed for use in both frameless and face-frame cabinetry systems. The manuals specify that the slides are compatible with drawers that have side thicknesses of either 1/2 inch (13 mm) or 5/8 inch (16 mm). The slides support 18-inch and 21-inch deep drawers, with specific dimensional tolerances outlined to ensure proper fit and function.
Installation Options
The installation process varies slightly depending on whether the cabinetry system is frameless or face-frame. In frameless cabinetry, the drawer slides must accommodate a setback of 3/8 inch (10 mm) and a front gap of 1/16 inch (1.5 mm). For face-frame installations, the setback is slightly less at 3/32 inch (2 mm), and the front gap remains at 1/16 inch. The documentation also includes instructions for installing an optional overlay decorative front, which requires additional depth to accommodate the overlay thickness.
Pre-Installation Requirements
Before beginning installation, users are advised to verify that all necessary components are included and that the correct tools are available. The required tools include a Phillips screwdriver, a drill with a 3/32-inch drill bit, a measuring tape, and a pencil. The manuals emphasize the importance of measuring and marking the installation area before proceeding to ensure proper alignment and spacing.
In both installation types, the slides must be aligned with the drawer side thickness. If the drawer sides are 1/2 inch thick, the slides must be adjusted accordingly to ensure smooth operation. The documentation also includes instructions for adjusting the slides for depth and side clearance, which is particularly important for face-frame systems where additional depth may be required.
Drawer Catch Installation
A critical step in the drawer installation process is the mounting of drawer catches. These catches are installed into the front corners of the drawer using either #6 x 3/4-inch or #6 x 1-inch screws. The screws should be installed at an angle no greater than 30 degrees to ensure secure attachment without damaging the drawer material.
For cabinets with a 1/2-inch (13 mm) door subfront, optional spacing components may be used to adjust the drawer alignment. The documentation also provides dimensional specifications for the drawer catch to ensure compatibility with the drawer slides.
Everbilt Tile Floor Backer Board Installation
The Everbilt Tile Floor Backer Board is designed to be installed over wood subfloors as a base for tile installation. This product is manufactured in the United States and is distributed through Home Depot. It is intended to provide a stable, moisture-resistant surface for ceramic or porcelain tile installations.
Pre-Installation Preparation
Before installing the backer board, the wood subfloor must be cleaned and prepared to ensure a smooth and even surface. The board must be cut to fit the installation area using a circular saw or jigsaw. Once the boards are cut, a thin layer of thin-set mortar is applied to the subfloor using a notched trowel to ensure proper adhesion.
Board Installation
The backer board is then placed onto the thin-set mortar and pressed firmly to create a secure bond. To further stabilize the board, backer board screws are used to secure the board to the subfloor. The screws should be spaced every 8 inches along the perimeter and every 12 inches in the field of the board. It is important to countersink the screws slightly below the surface to prevent any protrusions that could interfere with tile installation.
Joint and Corner Sealing
To ensure a seamless tile surface, all joints and corners of the backer board must be covered with fiberglass tape. The tape is then covered with a layer of thin-set mortar, which is smoothed out with a trowel. Once the mortar has fully dried, the tile installation can proceed.
The documentation emphasizes the importance of allowing the thin-set mortar to dry completely before installing tile to prevent any adhesion issues or structural weaknesses in the finished installation.
Everbilt Modular Closet Organizer Installation
The Everbilt 73.5-inch Double Long Hang with Six Shelf Stack system is a modular closet organizer designed for custom installation. The system includes a base kit and additional shelf covers that can be customized with different finishes, such as white, gray, or birch décor. The installation process is designed to be flexible, allowing users to plan their closet layout based on the available space and storage needs.
Planning and Configuration
Before beginning installation, users are instructed to measure the closet width and plan the layout. The documentation includes example illustrations to help users visualize the different configuration options. It is recommended to locate and mark the wall studs to ensure the closet organizer is securely mounted.
The base kit includes all the necessary hardware and components for assembly, and the user is advised to check the modular configuration guide included in the box to confirm that the correct number of boxes and components have been received.
Assembly and Installation
The installation instructions begin with the assembly of the base kit, followed by the mounting of the hang tracks. The hang tracks should be mounted onto the wall studs for maximum stability. The system includes a 24-inch shelf cover that can be used to customize the appearance of the shelves.
The documentation also includes a quick start guide that outlines the basic steps for assembling and installing the system. Users are encouraged to refer to the detailed "Assembly and Installation" instructions provided in the manual for more complex configurations.
Safety and Support
All Everbilt installation manuals include safety information to ensure that users follow best practices during the installation process. This includes warnings about using the correct tools, wearing appropriate safety gear, and ensuring that the installation surface is structurally sound.
In the event of questions, installation issues, or missing parts, the manuals direct users to contact Everbilt Customer Service at 1-800-305-1726. The customer service team is available Monday through Friday from 8 a.m. to 7 p.m. EST and on Saturdays from 9 a.m. to 6 p.m. EST.
The manuals also mention that repairs, replacements, or refunds are available under the product warranty, with the original purchase price being the sole remedy for any issues covered by the warranty.
Conclusion
Everbilt provides comprehensive installation instructions for a range of hardware and building materials, including drawer slides, tile backer boards, and modular closet systems. Each product includes detailed step-by-step guidance, dimensional specifications, and safety considerations to ensure accurate and safe installation. The documentation emphasizes the importance of pre-installation planning, tool preparation, and hardware selection to achieve the best results.
By following the provided instructions, users can successfully install Everbilt products for cabinetry, tile flooring, and closet organization. The manuals also offer valuable support resources, including customer service contact information and warranty details, to address any questions or concerns during the installation process.
For users seeking reliable, step-by-step guidance for hardware and building material installations, Everbilt’s documentation serves as a valuable reference for both DIY enthusiasts and professional installers.