The Spigen Thin Fit Pro case is designed to offer a seamless blend of durability, elegance, and functionality for users of Apple’s iPad Pro 12.9-inch (2021 and 2022 models). This accessory is specifically engineered to support enhanced productivity workflows by providing compatibility with the Apple Magic Keyboard, Smart Keyboard Folio, and Apple Official Smart Folio, while also including an integrated, magnetic Apple Pencil 2nd Generation holder.
This article will detail the recommended steps for installation, describe the key product features, and outline usage guidelines and troubleshooting tips. It will also reference the warranty and maintenance policies offered by Spigen to ensure that users can maximize their experience with the Thin Fit Pro case over time.
Installation and Setup
Proper installation of the Spigen Thin Fit Pro case is the first step to ensuring stability and optimal performance with your iPad Pro and related accessories. Before beginning, it is essential to prepare the device correctly.
Preparing Your iPad
Before attaching the Spigen Thin Fit Pro case, ensure that your iPad Pro 12.9-inch (models 2021 and 2022) is clean and free of dust and debris. Any buildup on the back or edges can interfere with the case’s fitting or the magnetic attachment when used with a keyboard or Apple Pencil. A soft, dry or slightly damp cloth is sufficient for surface cleaning.
Installing the Case
- Align the iPad with the Spigen Thin Fit Pro case, beginning with one side.
- Gently match the edges and press firmly around the perimeter.
- Ensure the corners are fully seated within the protective frame of the case.
- Verify that the case is fully aligned and secure, with no slouching or misalignment.
The case is designed to snap into place, providing a secure yet sleek enclosure that still allows unhindered access to the device.
Optional Attachments and Integration
One of the defining features of the Spigen Thin Fit Pro case is its compatibility with the Apple Magic Keyboard and Smart Keyboard Folio, as well as its ability to wirelessly charge an Apple Pencil 2nd Generation.
Attaching the Apple Pencil
The Spigen case includes a built-in, magnetic Apple Pencils holder on one side. This allows users to store and wirelessly charge the Apple Pencil without the need for extra docks or cables.
- Place the Apple Pencil 2nd Generation into the designated holder.
- The pencil will magnetically attach, and charging will begin automatically.
- A small cutout in the case helps prevent overheating and keeps the pencil secure.
To remove the pencil, simply slide it out from the cutout.
Connecting the Keyboard
To use with an Apple Magic Keyboard or Smart Keyboard Folio, the following steps apply:
- Align the magnetic connectors on the keyboard and the back of the Spigen case.
- Press firmly until the keyboard seats fully, closing the device compactly.
- The case is engineered with Magic Ready Technology, ensuring smooth attachment and seamless power transfer between the keyboard and the iPad.
This integration not only enhances portability but also maintains full functionality of the keyboard’s trackpad and backlit keys without obstruction.
Product Features and Design Enhancements
The Spigen Thin Fit Pro case provides a combination of practicality and aesthetics, making it suitable for everyday use in both casual and professional settings.
Material and Texture
- Premium vegan Velo leather outer layer ensures a luxurious yet eco-conscious feel.
- The inner layer is made from impact-resistant PC material, which balances lightness with strength.
Functional Details
- Precision cutouts allow full access to the USB-C port, volume buttons, and power button.
- A raised lip around the iPad Pro camera protects the lenses while allowing unimpeded use.
- The slim profile ensures the case is comfortable to handle while not compromising durability.
The case is certified for its unique design and functionality, and it is protected under US Patent No. 10,727,890, which relates to the Magic Keyboard compatibility features.
Daily Use and Maintenance
To ensure the longevity and consistent performance of the Spigen Thin Fit Pro case, regular maintenance is recommended and necessary.
Cleaning the Case
- Use a soft, damp cloth to wipe the surface of the case regularly.
- For more stubborn stains, a mild soap solution can be used, followed by a thorough wipe with a clean, damp cloth.
- Avoid abrasive materials or harsh chemicals, which may damage the vegan Velo leather or inner materials.
Storage and Handling
- Do not expose the case to prolonged sunlight, extreme temperatures, or excessive moisture.
- Avoid bending or prying the case open forcefully to remove the iPad, as this may damage the case or device.
- While the material is durable, gentle handling is encouraged to maintain its structural integrity and appearance.
Proper handling of the case ensures that the magnetic components, including the Apple Pencil holder and keyboard connectors, remain undisturbed and fully functional.
Troubleshooting Common Issues
Despite the durability and design of the Spigen Thin Fit Pro case, users may occasionally experience issues. The following table outlines potential problems, their likely causes, and recommended solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Case cannot attach securely to keyboard | Case is misaligned or connectors are dirty | Ensure alignment is accurate and clean both the iPad and keyboard's magnetic connectors |
| Apple Pencil not charging in holder | Magnetic connection is weak or the Pencil has low power | Ensure the Pencil is properly placed in the holder and has significant charge remaining. Try removing and reinserting |
| Case feels loose or unstable | Case may be damaged or improperly installed | Reinstall the case according to the setup instructions. If stiffness or cracks are evident, consider replacing |
| Port or button access is obstructed | Case installation was improper or cutouts are not aligned | Remount the case with care, ensuring that all edges connect and that the cutouts correspond with the device’s ports and buttons |
In the event that the problem persists after following the troubleshooting steps, it may be necessary to submit a warranty claim (see the Warranty and Support section).
Warranty and Customer Support
Spigen offers a 2-year limited warranty for the Thin Fit Pro case when purchased through authorized channels, including its official website and Amazon store (Spigen, Inc. USA). This warranty is non-transferable and applies only to the original purchaser.
Eligibility for Warranty
To qualify for warranty coverage, the product must be:
- Genuine Spigen products.
- Purchased directly from Spigen.com, authorized sellers, or the Spigen, Inc. Amazon USA store.
- Not modified, damaged by misuse, or repaired by unauthorized parties.
- Within a 2-year period from the original date of purchase.
Warranty Process
Spigen requires the following to proceed with a warranty claim:
- A proof of purchase (such as an order number or receipt).
- A detailed description of the issue.
- A photograph or video of the defect.
Depending on the severity or clarity of the problem, Spigen may require the return of the product for inspection or replacement. Users are advised not to dispose of the product until the warranty claim has been processed.
Exclusions
Certain items and damages are not covered by the warranty and include:
- Products purchased from unauthorized sellers.
- Items subject to final sale or promotional offers.
- Products with improper or non-genuine components.
- Damage due to accidental drop, normal wear and tear, or improper handling.
Spigen retains the right to deny claims related to these circumstances.
Additional Notes on Specific Case Lines
It is important to note that the Enzo Leather Case Collection is covered under a separate warranty policy. These cases are subject to a lifetime limited warranty, provided that users follow the care and usage instructions.
However, the 2-year warranty does not apply to the Enzo series. If users have this line, it is recommended to consult the specific warranty policy on the Spigen website.
Legal Disclaimer in Warranty Agreements
As with most warranty terms, the Spigen warranty is subject to state law limitations. Notably, the warranty includes a release clause, which waives claims for unknown or unsuspected issues. This is in accordance with California Civil Code Section 1542, a provision that may apply in other jurisdictions as well.
This legal protection is designed to limit Spigen’s liability, ensuring that the company is not responsible for defects or damages not immediately evident at the time of purchase.
Conclusion
The Spigen Thin Fit Pro case is a thoughtfully engineered accessory that enhances the functionality, stability, and aesthetics of the iPad Pro 12.9-inch. Its integration with Apple’s ecosystem—particularly with the Magic Keyboard and Apple Pencil 2nd Generation—makes it a versatile option for professional and casual users alike.
Installation is straightforward, and ongoing use benefits from the case’s precision cutouts, durable construction, and elegant design. Regular maintenance, as outlined in the guide, ensures the device’s longevity. In the event of any issues, the 2-year limited warranty offers reassurance to users who purchased the product through authorized channels.
By following the installation and care guidelines, users can make the most of the Spigen Thin Fit Pro case while preserving its performance and appearance for years to come.