The Delta Trinsic® T3558LF-WL single handle wall mount bathroom faucet trim is designed for durability, functionality, and ease of use in residential and commercial settings. This guide provides step-by-step installation instructions, maintenance tips, and troubleshooting solutions based on official documentation provided by Delta Faucet Company. The manual outlines the necessary components, precautions, and procedures to ensure safe and effective installation. This guide is intended for homeowners, DIY enthusiasts, and professional plumbers seeking to install or maintain the T3558LF-WL model.
Overview of Delta Trinsic® T3558LF-WL Specifications
The Delta T3558LF-WL is a single-handle wall-mounted faucet trim intended for use with Delta’s Trinsic® series. It is compatible with the R3510-WL rough-in valve and is designed for installation in bathrooms where space or accessibility is a concern. The model features a sleek design and is built to provide a modern, functional solution for handwashing applications.
Key specifications for the T3558LF-WL include:
- Model Number: T3558LF-WL
- Series: Trinsic®
- Installation Type: Wall mount
- Handle Type: Single handle
- Required Rough-In Valve: R3510-WL
- Water Supply Compatibility: 1/2-inch nominal copper tube
- Manufacturer: Delta Faucet Company
- Warranty: Varies based on consumer or commercial use
These specifications are derived directly from the official Delta installation manual, ensuring alignment with the product’s intended use and performance.
Pre-Installation Considerations
Before beginning the installation process, it is essential to review the manufacturer’s instructions thoroughly. Failure to follow these steps may result in personal injury, property damage, or product failure. Delta Faucet Company explicitly states that it assumes no responsibility for damage caused by improper installation, emphasizing the importance of adhering to the provided guidelines.
Required Tools and Materials
Delta recommends the following tools and materials for a successful installation:
- A 1/2-inch nominal copper tube
- A hex wrench for handle installation
- A mounting spout
- Gasket and O-ring (included with the trim)
- A set screw for securing the spout
- A damp cloth and soft towel for cleaning
It is also necessary to ensure that the installation is performed in a clean, dry environment to avoid contamination of the internal components.
Precautions
Delta’s manual includes several important precautions to ensure safety and product integrity:
- Read all instructions before installation: This is a critical step to avoid improper assembly or operation.
- Use only genuine Delta replacement parts: The manufacturer advises against using non-genuine components to maintain warranty coverage and product performance.
- Avoid use of harsh abrasives or polish: These can damage the finish and compromise the appearance of the faucet.
- Follow proper maintenance procedures: This includes regular cleaning, periodic inspection for leaks, and replacing worn components as needed.
Step-by-Step Installation Process
1. Mounting the Spout
The first step in the installation process is to mount the spout onto the wall. This requires careful preparation of the copper tubing and proper alignment of the spout with the wall surface.
- Prepare the copper tube: Ensure the copper tube is 1/2-inch nominal in size. If necessary, cut the tube to the appropriate length using a tubing cutter or saw. It is important to ensure the cut end is free of burrs to prevent leaks or damage to internal components.
- Install the gasket: Slide the gasket onto the copper tube before attaching the spout. The gasket helps to create a watertight seal between the tube and the spout.
- Mount the spout: Carefully slide the spout over the copper tube until it is flush with the wall surface. This ensures proper alignment and prevents the spout from protruding or sitting too deeply within the wall.
- Secure the spout: Tighten the set screw to hold the spout in place. It is important not to overtighten the screw, as this may cause damage to the components or create an uneven surface.
2. Installing the Handle
The handle installation involves several steps to ensure secure and smooth operation of the faucet.
- Remove the plasterboard: If the wall surface includes a plasterboard, it should be removed and discarded. This allows for direct installation of the handle and ensures a flush fit with the wall.
- Assemble the handle components: Install the sleeve, handle flange, gasket, and cap in the following order. These components should be placed over the stem of the faucet before securing the handle.
- Tighten the cap: The cap should be tightened by hand to avoid overtightening. If necessary, lubricate the O-ring to ensure smooth operation and prevent leaks.
- Secure the handle: Using a hex wrench, secure the handle onto the stem. Ensure that the handle is aligned properly and functions smoothly. Once the handle is in place, insert the button into the screw hole to complete the installation.
3. System Flushing and Leak Testing
After the installation is complete, it is important to flush the system and check for leaks.
- Turn on the water supply: If the water supply was previously turned off, restore it at this point.
- Remove the aerator: Remove the aerator from the spout and turn the faucet handle to the full position.
- Flush the water lines: Allow the water to run for one minute to flush out any debris that may have entered the system during installation.
- Reinstall the aerator: Reinstall the aerator to prevent debris from damaging the internal components.
- Check for leaks: Inspect all connections for leaks, including the spout, handle, and copper tubing. If any leaks are detected, tighten the connections or replace the affected components.
Maintenance and Troubleshooting
Regular maintenance is essential to ensure the long-term performance and reliability of the Delta Trinsic® T3558LF-WL faucet. The manufacturer provides troubleshooting steps for common issues, including leaks, low water flow, and spout leaks.
Common Issues and Solutions
Leak under the handle
- Solution: Tighten the bonnet nut. If the leak continues, replace the cartridge.
Low water flow
- Solution: Clean the aerator. Over time, mineral buildup and debris can restrict water flow, so regular cleaning is recommended.
Spout leak near the wall
- Solution: Replace the O-ring in the spout. A worn or damaged O-ring may cause water to leak along the wall surface.
General maintenance
- Cleaning: Clean the faucet gently with a damp cloth and blot dry with a soft towel. Avoid using harsh abrasives or polish, as these can damage the finish.
- Periodic inspection: Inspect the faucet periodically for signs of wear, such as loose components, leaks, or reduced water flow. Address any issues promptly to prevent further damage.
Warranty and Support
Delta Faucet Company provides a warranty for the T3558LF-WL model, covering defects in materials and workmanship. The warranty terms vary based on whether the product is used in a residential or commercial setting.
Residential Warranty
For residential consumers, the warranty covers all parts and finishes for as long as the original consumer owns the home in which the faucet was first installed. This is a lifetime warranty for residential use, provided the product was purchased from an authorized Delta seller and installed according to the manufacturer’s instructions.
Commercial Warranty
For commercial applications, the warranty period is as follows:
- Multi-family residential applications: 10-year warranty
- Other commercial applications: 5-year warranty
These warranties are calculated from the date the product is received by the original purchaser or their authorized representative, such as an installation contractor.
Warranty Claims and Replacement Parts
To make a warranty claim or obtain replacement parts, contact Delta Faucet Company by:
- Phone: 1-800-345-DELTA (3358)
- Online: Visit www.deltafaucet.com/service-parts
- Mail: Delta Faucet Company, 55 E. 111th Street, Carmel, IN 46280
When submitting a warranty claim, it is necessary to provide the model number, date of original purchase, and documentation of receipt. This information helps Delta verify the claim and determine the appropriate course of action.
Limitations and Exclusions
The warranty does not cover damage caused by:
- Improper installation or maintenance
- Use of non-genuine replacement parts
- Freezing water or outdoor use
- Abuse or neglect
- Labor charges for installation, repair, or removal
Delta Faucet Company strongly recommends using a professional plumber for all installation and repair work to ensure compliance with warranty terms and to avoid potential liability for damage caused by improper procedures.
Additional Resources
Delta provides a range of technical resources for users, including installation guides, product specifications, and troubleshooting tips. These materials are available online at www.deltafaucet.com. Users can also register their products online to receive updates, access replacement parts, and stay informed about product recalls or improvements.
For those seeking detailed installation instructions, the complete Delta T3558LF-WL Single Handle Wall Mount Bathroom Faucet Trim manual is available in PDF format. This document includes detailed diagrams, step-by-step instructions, and technical specifications to assist with the installation and maintenance process.
Conclusion
The Delta Trinsic® T3558LF-WL single handle wall mount bathroom faucet trim is a versatile and reliable solution for modern bathroom installations. With clear installation instructions, maintenance guidelines, and a comprehensive warranty, this product is well-suited for both residential and commercial applications. By following the manufacturer’s recommendations and using genuine Delta components, users can ensure long-term performance and satisfaction with their faucet.
Whether you are a homeowner looking to upgrade your bathroom or a professional plumber seeking a reliable fixture, the T3558LF-WL provides a combination of functionality, durability, and ease of use. Proper installation and regular maintenance are key to maximizing the benefits of this product, and Delta’s extensive support resources make it easier than ever to address any questions or concerns that may arise during use.