The Eden 96093 Sprinkler System is a modular and flexible solution designed to meet the irrigation needs of modern gardens and landscapes. Ideal for U.S. consumers seeking a tool-free, customizable system, the 96093 model offers precise water coverage, adjustable spray arcs, and expandable configurations. With a focus on ease of installation and user control, this system is well-suited for homeowners, gardeners, and DIY enthusiasts.
The Eden 96093EDAMZ model, part of Eden’s broader line of garden irrigation tools, includes three sprinkler heads, 5-inch riser extensions, a T-bracket connector, and 50 feet of green hose. It supports up to three connected sets per water circuit and delivers a 30-foot spray radius per rotor when operating at 50 PSI. This article will walk through the installation process, configuration options, and troubleshooting guidance based on official documentation and product specifications.
Installation Overview
The Eden 96093 system is designed for straightforward, tool-free setup. The following steps summarize the key phases of installation:
Prepare the Hose:
The system includes 50 feet of green hose, which users can cut to size using a PEX cutter or sharp scissors. A clean, straight cut ensures a secure connection between the hose and sprinkler heads.Attach Connectors:
The system provides a hose starter connection for linking to a garden hose, a T-bracket connector for splitting the water flow into two directions, and a hose extender/repair piece for extending or repairing hose segments.Connect Sprinkler Heads:
Each sprinkler head is connected via a cap that compresses the hose to form a watertight seal. The cap is screwed onto the port of the sprinkler head after the hose is inserted.Position Sprinklers:
Sprinkler heads are inserted into the ground using ground spikes. Users can adjust the height using the included 5-inch riser extension tubes, which are particularly useful for watering over taller plants or shrubs.Adjust Spray Settings:
Each sprinkler head includes an On/Off switch, a rotator for directional control, and a spray adjuster that allows the arc to be set between 5° and 360°.
These steps ensure a customized and efficient irrigation system tailored to the specific layout of the garden or lawn.
Detailed Setup Instructions
The Eden 96093 Sprinkler System is designed for modular and scalable installation. The following section outlines the detailed setup process based on the included components and their intended use.
Step 1: Cutting and Preparing the Hose
The 50-foot green hose included in the package is designed for flexibility and durability. To begin, users must cut the hose into segments of desired lengths. A PEX cutter or sharp scissors should be used to ensure a clean and straight cut. This step is critical to avoid leaks and ensure a secure connection to the sprinkler heads.
Each hose segment will be connected to a sprinkler head via a cap that compresses the hose to form a watertight seal. Before attaching the cap, the hose must be fully inserted into the port on the side of the sprinkler head. The cap is then screwed on to compress the hose and create a secure connection.
For users who need to extend or repair a hose, the system includes a hose extender/repair piece. This can be used to lengthen the hose or replace a damaged section. The extender is simply connected between two hose segments, and the same cap compression method is used to secure the connection.
Step 2: Connecting the Hose to the Water Source
The system includes a hose starter connection, which is used to connect the main garden hose to the system. This component is attached to one end of a hose segment and serves as the primary water inlet.
Users should ensure that the garden hose is securely connected to the starter connection. A garden hose typically has a 0.5-inch inlet, which matches the system’s inlet connection size. Once the connection is made, the water supply can be turned on to test for leaks or improper connections.
The T-bracket connector is an optional but useful component for splitting the water flow into two directions. This allows users to create two separate watering zones from a single water source, which is especially beneficial for large gardens or when the water supply is located in the center of the garden.
Step 3: Installing Sprinkler Heads
The system includes three sprinkler heads, each equipped with ground spikes for secure placement in the soil. To install a sprinkler head, the user should first insert the ground spike into the desired location. The hose segment is then connected to the side port of the sprinkler head using the cap compression method described earlier.
The 5-inch riser extension tubes are included to elevate the sprinkler heads above taller plants or shrubs. These tubes are simply placed between the sprinkler head and the ground spike, allowing the spray to clear obstacles and reach the intended area.
Step 4: Adjusting the Sprinkler Settings
Each sprinkler head features three key adjustment settings:
On/Off Switch: A red lever allows the user to individually turn each sprinkler head on or off. This feature is useful for managing different sections of the garden or for conserving water during periods of adequate rainfall.
Rotator: The rotator mechanism, located below the sprinkler head, allows the user to point the sprinkler in the desired direction. This feature is particularly useful for directing water to specific areas of the garden without physically moving the sprinkler head.
Spray Adjuster: The spray adjuster, located on top of the sprinkler head, allows the user to set the spray arc from 5° to a full 360°. This feature enables precise watering for specific areas, whether it's a narrow strip or a full circle.
These adjustments allow the user to customize the system to the specific needs of their garden, ensuring that water is distributed efficiently and effectively.
Operation and Usage
Once installed, operating the Eden 96093 system is straightforward. The following steps outline the basic operation of the system:
Turn on the Water Supply:
The system is connected to a garden hose via the hose starter connection. To begin operation, the user simply turns on the water supply.Adjust the Sprinkler Settings:
Each sprinkler head can be individually adjusted using the On/Off switch, rotator, and spray adjuster. This allows the user to fine-tune the system to the specific layout of their garden.Monitor and Maintain the System:
The system is designed for long-term use, but regular maintenance is recommended to ensure optimal performance. Users should periodically check for leaks, kinks in the hose, or blockages in the sprinkler heads.
The system is intended for outdoor use with cold water only. When not in use, it is recommended to rinse the system to remove dirt, drain it, and store it indoors away from freezing temperatures.
Troubleshooting Common Issues
Despite the system’s durability and ease of use, users may encounter a few common issues. The following table outlines possible problems, their causes, and solutions based on the provided documentation.
| Problem | Possible Cause | Solution |
|--------|----------------|----------|
| Low water pressure or short spray distance | Insufficient water supply, kinked hose, too many sprinklers on one circuit | Ensure adequate water pressure from the source. Check hoses for kinks. Reduce the number of sprinklers on a single water circuit or increase water supply. |
| Leaking connections | Hose not properly inserted, cap not tightened sufficiently, damaged hose end | Ensure the hose is fully inserted into the sprinkler port. Tighten the cap securely. Use the included hose repair connector if the hose end is damaged. |
| Sprinkler not rotating or spraying correctly | Debris in the nozzle, spray adjuster set incorrectly | Check the nozzle for any blockages and clear them. Adjust the spray adjuster to the desired arc (5° to 360°). |
These troubleshooting steps can help users quickly resolve common issues and ensure the system operates efficiently. For more detailed guidance, users are encouraged to consult the official Eden website or contact customer support.
Specifications and System Capabilities
Understanding the technical specifications of the Eden 96093 system is essential for ensuring it meets the user’s irrigation needs. The following table outlines the key specifications provided in the documentation:
| Specification | Details |
|--------------|---------|
| Brand | Eden |
| Model Number | 96093EDAMZ |
| Color | Black, Red |
| Material | Metal, Plastic (ABS plastic for durability) |
| Style | Raised (with optional extension tubes) |
| Item Dimensions (L x W x H) | 9.84 x 3.14 x 3.54 inches |
| Item Weight | 10.8 ounces |
| Maximum Pressure | 50 PSI |
| Maximum Flow Rate | 4.8 Gallons Per Minute |
| Inlet Connection Size | 0.5 Inches |
| Coverage per Rotor | Up to 30 ft spray radius |
| Adjustable Arc | 5° to 360° |
| Total Coverage (3 rotors) | Up to 3,200 sq. ft. |
| Expandability | Up to 3 connected sets per water circuit |
These specifications indicate that the Eden 96093 is a versatile and powerful system capable of covering large areas with precise water distribution. The use of ABS plastic ensures durability, while the modular design allows for expansion as the garden grows.
Warranty and Support
The Eden 96093EDAMZ system comes with a 2-year limited warranty, which covers defects in materials and workmanship under normal use. For warranty claims, technical support, or further inquiries, users are encouraged to refer to the official Eden website or contact their customer service department.
It is important to note that the warranty does not cover damage caused by improper installation, misuse, or exposure to extreme conditions. Users should also retain their purchase receipt as proof of purchase when making a warranty claim.
The system is intended for outdoor use with cold water only. To maintain its longevity, users should rinse the system after use to remove dirt, drain it, and store it indoors during periods of freezing temperatures.
An Eden Garden Hose Model 94051EDAMZ is recommended for optimal performance, although it is not included in the 96093 package.
Conclusion
The Eden 96093 Sprinkler System offers a reliable, flexible, and user-friendly solution for garden irrigation in the United States. With its modular design, adjustable spray settings, and expandable configuration, the system is well-suited for a wide range of garden sizes and layouts.
The installation process is designed to be straightforward, requiring no specialized tools and allowing for easy customization. Users can adjust the spray arc, direction, and coverage to meet the specific needs of their garden, ensuring efficient water use and even distribution.
Troubleshooting common issues such as low pressure, leaks, or improper spray patterns is simplified with the provided guidance, and the system’s warranty offers additional peace of mind for users.
For those seeking a durable and adaptable sprinkler system, the Eden 96093 provides a compelling option that balances functionality, ease of use, and long-term value.