Wall mounts for large flat-panel televisions require precise installation to ensure safety, stability, and optimal viewing experience. Best Buy Essentials provides two wall mount models designed for varying television sizes and weight capacities: the BE-TVLTLC for 47–84" TVs and the BE-MSFM for 19–50" TVs. This article focuses on the BE-TVLTLC model, which supports TVs up to 110 lbs (49.89 kg) and is tailored for larger displays. The installation process involves careful planning, adherence to safety protocols, and use of appropriate tools. Below is a detailed guide based on the information provided in the official manuals and user guides.
Overview of the BE-TVLTLC Wall Mount
The BE-TVLTLC wall mount is designed for large flat-panel televisions ranging from 47 to 84 inches in diagonal size. It offers a maximum weight capacity of 110 lbs (49.89 kg), making it suitable for most modern televisions within this range. The mount supports VESA mounting patterns from 100 × 100 mm up to 600 × 400 mm, ensuring compatibility with a wide variety of television models.
One of the key features of the BE-TVLTLC is its tilt adjustment, which allows users to adjust the viewing angle between -15° to +3°. This feature helps reduce glare and improve visibility from different seating positions in the room. The mount is constructed from sturdy steel, ensuring durability and long-term reliability. Additionally, it is backed by Best Buy Essentials, which guarantees quality and customer support.
Safety Precautions and Installation Requirements
Before beginning the installation process, it is crucial to review and understand the safety instructions provided by the manufacturer. The installation of a wall mount for a large television involves heavy equipment and requires proper tools and techniques. Failure to follow the recommended guidelines can result in property damage or personal injury.
Key Safety Warnings
- Maximum weight capacity must not be exceeded. The wall mount is designed to support up to 110 lbs (49.89 kg). Mounting a television heavier than this can lead to structural failure.
- Wall capacity must be adequate. The wall itself must be capable of supporting four times the standard weight of the television and mount combined.
- Do not over-tighten screws. Excessive tightening can cause damage to the wall or mounting hardware.
- Avoid using the mount for purposes other than its intended use. The mount is not suitable for outdoor installation or for supporting additional weight beyond the specified limit.
- Installation must be performed by two qualified individuals. Due to the size and weight of the television, it is recommended that the installation be done by two people to ensure safety and accuracy.
Tools Required for Installation
The installation process requires a variety of tools to ensure proper assembly and secure mounting. The following tools are necessary:
- Edge-to-edge stud finder
- Pencil
- 7/32 in. (5.5 mm) wood drill bit (for wood stud walls)
- 3/8 in. (10 mm) masonry drill bit (for concrete walls)
- Masking tape
- Hammer
- 1/2 socket wrench
- Phillips screwdriver
- Drill
- Measuring tape
These tools are essential for identifying wall studs, drilling holes, and securing the mount to the wall. It is recommended to use the appropriate drill bits based on the wall type (wood or concrete) to ensure proper installation.
Package Contents and Hardware
Before beginning the installation, it is important to ensure that all necessary parts and hardware are included in the package. The BE-TVLTLC wall mount includes the following components:
- Wall plate
- Left TV bracket
- Right TV bracket
- Template
- TV Mounting Hardware:
- Lag screw M8 x 60mm – 4
- Concrete anchor – 4
- M6 x 17 mm spacer – 4
It is crucial to verify that all parts are present before starting the installation process. Missing components can lead to delays or the need for additional purchases, which may affect the overall safety and stability of the mount.
Step-by-Step Installation Instructions
Step 1: Assess the Back of the TV
Before mounting the television, it is important to determine the type of back your TV has. This will help ensure proper alignment of the brackets and prevent damage to the television or its ports.
- Place the TV face-down on a cushioned, clean surface to protect the screen.
- Remove the table-top stand if your TV has one. Refer to the television’s documentation for instructions on how to remove the stand.
- Lay the TV brackets, oriented vertically, on the back of the television.
- Align the screw holes in the TV brackets with the mounting screw holes on the TV.
- Identify the type of back your TV has:
- Flat back: The brackets lay flush against the back of the TV and do not block any jacks.
- Irregular or obstructed back: The brackets may block some jacks, requiring the use of spacers during installation.
Step 2: Attach the TV Brackets
Once the type of back has been identified, the next step is to attach the TV brackets to the back of the television.
- Position the brackets on the back of the TV, ensuring they are aligned with the mounting holes.
- Secure the brackets using the provided screws. Make sure the screws are tightened evenly to avoid putting uneven pressure on the television.
- Use spacers if necessary to accommodate an irregular or obstructed back. The spacers help create space between the brackets and the TV, allowing for proper alignment and access to ports.
Step 3: Mount the Wall Plate
The wall plate is the primary component that connects the mount to the wall. It must be securely installed to ensure the stability of the entire system.
- Determine the location where the wall mount will be installed. Ensure the area is free of obstructions and provides optimal viewing angles.
- Use a stud finder to locate the wall studs. Mark the stud locations with a pencil.
- Align the wall plate with the marked stud locations using the provided template. The template helps ensure accurate placement and alignment.
- Secure the wall plate to the wall using the provided lag screws and concrete anchors. Tighten the screws evenly to avoid warping the wall plate.
Step 4: Connect the TV to the Wall Mount
After the wall plate has been installed, the next step is to connect the television to the wall mount.
- Lift the television carefully and position it over the wall mount. Ensure the brackets on the back of the TV align with the mounting points on the wall plate.
- Secure the TV to the wall plate using the provided screws. Tighten the screws evenly to ensure the television is securely attached.
- Adjust the tilt of the television using the tilt adjustment feature on the wall mount. This allows you to adjust the viewing angle between -15° to +3° to reduce glare and improve visibility.
Step 5: Final Adjustments and Safety Checks
Once the television is mounted, it is important to perform final adjustments and safety checks to ensure everything is properly installed.
- Adjust the swivel of the television if the wall mount supports swivel movement. This allows you to rotate the television for different viewing positions.
- Check the level of the television to ensure it is evenly mounted. Use a spirit level to verify the alignment.
- Test the stability of the mount by gently pushing on the television from different angles. It should remain stable and not wobble or shift.
- Double-check all screws and connections to ensure they are tightened properly.
Compatibility and VESA Patterns
The BE-TVLTLC wall mount is compatible with a wide range of VESA mounting patterns. VESA is a standardized system that ensures compatibility between television manufacturers and mounting hardware. The BE-TVLTLC supports VESA patterns from 100 × 100 mm up to 600 × 400 mm, covering most modern television models.
The following VESA patterns are supported:
- 100 × 100 mm (3.9 × 3.9 in)
- 200 × 200 mm (7.9 × 7.9 in)
- 300 × 200 mm (11.8 × 7.9 in)
- 300 × 300 mm (11.8 × 11.8 in)
- 400 × 200 mm (15.7 × 7.9 in)
- 400 × 300 mm (15.7 × 11.8 in)
- 400 × 400 mm (15.7 × 15.7 in)
- 500 × 400 mm (19.7 × 15.7 in)
- 600 × 400 mm (23.6 × 15.7 in)
Before installation, it is important to verify that the television’s mounting holes match one of the supported VESA patterns. If the television does not support one of the listed patterns, it may not be compatible with the BE-TVLTLC wall mount.
Frequently Asked Questions (FAQ)
Q: What is the maximum weight capacity of the BE-TVLTLC wall mount?
A: The BE-TVLTLC wall mount has a maximum weight capacity of 110 lbs (49.89 kg). It is suitable for most modern televisions within the 47–84" size range.
Q: Can I use the wall mount for a television that is heavier than the recommended weight?
A: No. The wall mount is designed to support a maximum weight of 110 lbs (49.89 kg). Using it with a television that exceeds this weight can lead to structural failure and potential injury.
Q: What is the recommended wall type for installation?
A: The wall must be capable of supporting four times the weight of the television and mount combined. It is recommended to use either wood stud walls or concrete walls for installation.
Q: Can I install the wall mount by myself?
A: It is strongly recommended that the installation be done by two qualified individuals due to the size and weight of the television. This ensures safety and accuracy during the installation process.
Q: What tools are required for installation?
A: The following tools are required:
- Edge-to-edge stud finder
- Pencil
- 7/32 in. (5.5 mm) wood drill bit (for wood stud walls)
- 3/8 in. (10 mm) masonry drill bit (for concrete walls)
- Masking tape
- Hammer
- 1/2 socket wrench
- Phillips screwdriver
- Drill
- Measuring tape
Q: Can I adjust the viewing angle of the television after installation?
A: Yes. The BE-TVLTLC wall mount offers a tilt adjustment between -15° to +3°, allowing you to adjust the viewing angle to reduce glare and improve visibility.
Conclusion
The BE-TVLTLC wall mount is a durable and versatile solution for mounting large flat-panel televisions up to 84 inches in size. With a maximum weight capacity of 110 lbs (49.89 kg), it supports a wide range of television models and offers features such as tilt adjustment and swivel movement to enhance the viewing experience. The installation process requires careful planning, proper tools, and adherence to safety guidelines to ensure a secure and stable mount. By following the step-by-step instructions provided in the official manual, users can confidently install the wall mount and enjoy a safe and convenient setup.