The Autostop Eliminator is a smart, plug-and-play device designed to disable and permanently retain the auto start-stop feature in supported vehicles. It eliminates the need to manually disable the feature after each ignition cycle, streamlining the driving experience and reducing driver frustration. This article provides a detailed, user-focused guide on how to install the Autostop Eliminator on 2021–2025 Ford F-150 models and supported Jeep models such as the Wrangler JL, Gladiator JT, and Grand Cherokee WK2.
The following instructions are based on official installation guidelines and user feedback shared through verified product pages and technical documentation. These steps assume the use of a plug-and-play eliminator module designed specifically for each vehicle’s auto start-stop system.
Understanding the Autostop Eliminator
The Autostop Eliminator functions by intercepting the electrical signal from the vehicle’s auto start-stop button. Once installed, it remembers the user’s preference to keep the feature disabled and maintains that setting across restarts and even after battery disconnection. The device is designed to be non-invasive and compatible with factory systems, ensuring no damage or voiding of warranty.
Key features of the Autostop Eliminator include:
- Plug-and-play design – No cutting or splicing of wires is required.
- No manual reactivation – The system remembers your preference automatically.
- Quick installation – Most installations take between 5 and 10 minutes.
- No negative side effects – The device maintains full functionality of the vehicle’s other systems.
As noted in user feedback, the device is often described as “easy to install,” “cost-effective,” and “a great solution” to the frustrations caused by auto start-stop systems.
Pre-Installation Considerations
Before proceeding with installation, ensure the following conditions are met:
1. Vehicle Compatibility
Verify that your vehicle is supported by the Autostop Eliminator. According to installation instructions from official product pages:
- Ford F-150 Models: 2021–2025
- Jeep Models: Wrangler JL, Gladiator JT, Grand Cherokee WK2, and similar
Each model may have slightly different installation steps, particularly for the 2024–2025 Ford F-150, which requires a distinct process. Always consult the specific installation instructions for your model year.
2. Tools and Materials
Gather the following tools and materials:
- Autostop Eliminator module – Ensure it is specifically designed for your vehicle.
- Trim removal tool or flathead screwdriver – Optional but recommended for accessing dash panels.
- Flashlight – Helps with visibility in tight spaces.
- Basic hand tools – May be required depending on the model and dash configuration.
No soldering, wiring, or advanced technical skills are required for installation. The device is designed for average users with basic mechanical abilities.
Installing the Autostop Eliminator on a Ford F-150 (2021–2023)
For 2021–2023 Ford F-150 models, the installation process is relatively straightforward and can be completed in under 10 minutes.
Step 1: Turn Off the Vehicle
- Ensure the vehicle is completely turned off.
- Remove the key from the ignition (if applicable).
- Avoid leaving the ignition in accessory or on mode.
Step 2: Locate the Auto Start/Stop Switch Assembly
- The switch assembly is typically located on the center console or dashboard.
- Identify the back of the switch where the wiring harness connects.
Step 3: Plug in the Autostop Eliminator
- Insert the Autostop Eliminator module into the factory wiring harness.
- Connect the other end of the module to the back of the auto start-stop switch.
- The connection forms a “Y” shape, with the eliminator module sitting between the wiring harness and the switch.
Step 4: Secure and Test
- Tuck the wiring and module neatly into the dash to prevent rattling.
- Ensure the panel is fully seated and flush with the dashboard.
- Turn on the vehicle to confirm the “A” indicator is off and the system remembers your preference.
According to user feedback, the installation is generally described as simple and intuitive. Once installed, the device works seamlessly to retain your auto start-stop preference.
Installing the Autostop Eliminator on a Ford F-150 (2024–2025)
The 2024–2025 Ford F-150 models require a slightly different installation process due to changes in the dash panel design and wiring configuration.
Step 1: Turn Off the Vehicle
- Turn off the engine and remove the key or push-button ignition.
- Confirm that the vehicle is in the off state.
Step 2: Access the Dash Panel
- Locate the panel containing the auto start-stop button.
- Gently pull the panel outward using a trim tool or your fingers.
- The panel should pop off without force.
Step 3: Disconnect the OEM Harness
- Identify the wiring harness connected to the back of the switch.
- Press the release tab and disconnect the harness from the switch.
Step 4: Install the Eliminator Module
- Insert the Autostop Eliminator into the OEM wiring harness.
- Connect the other end of the module to the back of the switch.
- The module creates a “Y” connection between the harness and the switch.
Step 5: Secure and Test
- Tuck the module and wiring neatly into the dash.
- Reinstall the dash panel and press until flush.
- Start the vehicle and verify that the “A” light remains off.
Installation instructions for the 2024–2025 models are clearly outlined in the manufacturer’s documentation. Users are advised to review the specific installation guide for these models to ensure proper fit and function.
Installing the Autostop Eliminator on a Jeep (Wrangler JL, Gladiator JT, etc.)
Jeep models such as the Wrangler JL and Gladiator JT use a similar installation process to the Ford F-150. The procedure is straightforward and designed for easy execution.
Step 1: Turn Off the Jeep
- Ensure the engine is off and the keys are removed.
- For push-button start models, fully turn off the ignition and avoid leaving it in accessory mode.
Step 2: Access the Dash Panel
- Locate the Start/Stop button panel.
- Use a trim tool or fingers to gently pull the panel outward from the edges.
- The panel should pop off with light pressure.
Step 3: Unplug the OEM Harness
- Find the wiring harness connected to the back of the Start/Stop button.
- Press the release tab and disconnect the harness.
Step 4: Install the Eliminator Module
- Plug the Autostop Eliminator module into the OEM wiring harness.
- Connect the other end of the module to the back of the Start/Stop button.
- The module creates a “Y” connection between the harness and the button.
Step 5: Secure and Test
- Tuck the wiring and module into the dash to avoid interference.
- Snap the panel back into place and press until flush.
- Start the Jeep and confirm the “A” light is off.
According to the manufacturer’s installation guide, this process ensures that the system remembers your preference for the auto start-stop feature. Once installed, the device functions automatically without any further user input.
Post-Installation Tips and Troubleshooting
After completing the installation, it is important to perform a final test to confirm that the device is working as intended.
1. Start the Vehicle
- Start the engine and observe the behavior of the auto start-stop feature.
- The “A” light should remain off, indicating that the feature is disabled.
2. Test Across Multiple Ignition Cycles
- Turn off the vehicle and restart it multiple times to confirm that the setting is retained.
- If the “A” light returns, double-check the installation and wiring connections.
3. Monitor for Unusual Behavior
- Ensure that no other vehicle systems are affected by the installation.
- The Autostop Eliminator is designed to be non-invasive, but it is important to monitor for any unintended side effects.
4. Keep the Packaging
- If you ever need to uninstall or return the device, keep the original packaging.
- The manufacturer offers a 60-day return policy for any unsatisfied customers.
Why Choose the Autostop Eliminator Over Other Hacks?
While there are many online “hacks” for disabling auto start-stop features, they often involve cutting wires, bypassing safety systems, or using unverified devices. These methods can damage the vehicle or void the warranty.
The Autostop Eliminator, on the other hand, is a certified and officially recommended solution. It is:
- Safe: No wires are cut or spliced.
- Reliable: Maintains all factory functions and safety features.
- Warranty-Friendly: Designed to not interfere with the vehicle’s warranty.
- User-Friendly: Easy to install and remove.
As noted in user reviews, the device is often described as the “best money spent” due to its simplicity and effectiveness.
Conclusion
The Autostop Eliminator is a convenient and effective solution for disabling the auto start-stop feature on supported Ford and Jeep models. The installation process is simple, requiring only basic tools and mechanical knowledge. Once installed, the device automatically retains your preference, eliminating the need to manually disable the feature after each ignition cycle.
Whether you are a daily commuter, an off-road enthusiast, or simply tired of the auto start-stop system interrupting your driving experience, the Autostop Eliminator offers a reliable and cost-effective solution. It is recommended for anyone seeking to improve the driving experience without compromising vehicle performance or safety.