Allen + Roth vanities are designed to offer a balance of functionality and aesthetic appeal, making them a popular choice for bathroom renovations. The 36-inch and 60-inch vanity models with integrated tops are particularly convenient for DIY installers due to their preassembled components and straightforward installation process. This guide provides a detailed overview of the installation steps, precautions, and care instructions for both models, based on the official documentation and installation manuals provided by the manufacturer.
Overview of the Models
Allen + Roth offers two vanity models with tops: the 36-inch vanity (Model #2026VA-36-201-901) and the 60-inch vanity (Model #1541VA-60-242-925). Both models are part of the company's line of bathroom fixtures, available through retailers such as Lowe’s. These vanities are preassembled with components such as tops, backsplashes, doors, and drawers, reducing the complexity of installation for the end user.
The 36-inch model includes one set of left and right doors, a single shelf, and a floor plumbing cutout lid, while the 60-inch model includes two left and two right doors, two shelves, and a center support leg. Both models are constructed with a quartz top and include hardware for assembly and finishing touches.
Package and Hardware Contents
Each model comes with a comprehensive list of components and hardware. For the 36-inch model, the package includes:
- 1 Vanity (A)
- 1 Top (preassembled to vanity)
- 1 Backsplash
- 1 Left Door
- 1 Right Door
- 1 Floor Plumbing Cutout Lid
- 1 Shelf
For the 60-inch model, the components are:
- 1 Vanity (A)
- 1 Top (preassembled to vanity)
- 1 Backsplash
- 2 Left Doors
- 2 Right Doors
- 2 Shelves
- 1 Center Support Leg
Both models include hardware for drawers and doors, including pulls, hinges, and drawer glides. Additional tools required for installation, such as a Phillips screwdriver, utility knife, silicone caulk, and a level, are not included in the package.
Safety and Precautions
Before beginning the installation, it is important to read and understand the safety instructions provided in the manufacturer's documentation. These instructions are designed to prevent damage to the vanity and to ensure the safety of the installer.
Warning: - Several assembly steps, including unpacking and positioning the vanity, require two adults. Attempting to move or install the vanity alone may result in damage to the product or personal injury.
Caution: - Do not try to pry off the top from the vanity, as this may cause damage to either the top or the vanity. - Follow the instructions closely, take your time, and use care while assembling the vanity. - If any parts are missing or damaged, do not attempt to assemble the product before contacting the manufacturer or retailer.
Preparation for Installation
Proper preparation is essential to ensure a smooth installation process. Before beginning, verify that all parts are present and undamaged by comparing them to the package and hardware contents lists. If any parts are missing or damaged, contact the manufacturer or retailer for assistance before proceeding.
Tools and Materials Required
The following tools and materials are required for installation but are not included in the package:
- Phillips screwdriver
- Utility knife or scissors
- Silicone caulk
- Power drill with a drill bit
- Measuring tape (optional but helpful)
- Level (optional but helpful)
These tools will be used to remove packaging, adjust levelers, and apply silicone caulk for sealing the vanity in place.
Installation Time Estimate
The manufacturer estimates that the installation time for both the 36-inch and 60-inch models is approximately 45 minutes. However, an additional 24 hours is required for the silicone caulk to dry completely after the vanity is sealed in place.
Installation Instructions
The installation process involves several key steps, including unpacking the vanity, positioning it against the wall, leveling it, attaching the faucet and drain (if applicable), and installing the drawers and doors.
Step 1: Unpacking and Positioning the Vanity
Before unpacking, ensure that the area where the vanity will be installed is clean and free of obstructions. The vanity should be placed in its final location to avoid unnecessary movement after installation.
- Carefully remove the vanity from its packaging, ensuring that the top and backsplash are placed face down on a scratch-free surface such as a foam sheet.
- With the help of a second person, carefully place the vanity base against the wall in its final position.
Step 2: Leveling the Vanity
Leveling the vanity is crucial to ensure stability and proper functionality of doors and drawers.
- Use the pre-assembled levelers located at the bottom of each leg to adjust the height of the vanity.
- Twisting the levelers counterclockwise will raise the height of the vanity.
- Twisting the levelers clockwise will lower the vanity.
It is recommended to use a level to ensure that the vanity is perfectly level from front to back and side to side.
Step 3: Attaching the Faucet and Drain
Although the faucet and drain assemblies are not included with the vanity, they must be installed according to the manufacturer’s instructions.
- If applicable, attach the faucet before placing the vanity in its final location, as this may be easier due to the limited space behind the vanity once it is mounted.
- Follow the manufacturer’s instructions for the faucet and drain assemblies to ensure a secure and leak-free installation.
Step 4: Installing the Drawers and Doors
Both the 36-inch and 60-inch models include drawer fronts and door panels that must be installed after the vanity is positioned and leveled.
Drawer Installation
- To install the drawers:
- Fully extend the metal glide tracks.
- Gently lower and slide the drawer box into the rear glide catch.
- Lower the drawer box until it rests completely on the extended glides.
- Push the plastic levers to lock the drawer box in place.
Door Installation
- Doors are preassembled to the vanity and include hinges and pulls for easy installation.
- Ensure that the doors open and close smoothly. If adjustments are needed:
- Spin the adjustment wheel to the left to raise the drawer box.
- Spin the adjustment wheel to the right to lower the drawer box.
- The left and right-side glide heights can be adjusted independently to find the best alignment.
Caution:
Do not force the drawer or door, as this may cause damage to the glide or hinge mechanisms. If the drawer does not slide in with ease, remove it and try again from the start.
Sealing the Vanity
Once the vanity is properly leveled and the drawers and doors are installed, the final step is to seal the vanity in place using silicone caulk.
- Apply a bead of silicone caulk around the base of the vanity where it meets the wall.
- Allow the caulk to dry for 24 hours before using the vanity.
Care and Maintenance
Proper care and maintenance are essential to preserve the appearance and functionality of the vanity over time.
Dusting and Cleaning
- Dust the vanity regularly with a soft, non-lint-producing cloth or household dusting product.
- Clean the vanity with a gentle, non-abrasive household cleaner.
- Dry the wood immediately with a soft cloth or towel to prevent water damage.
Cleaning the Quartz Top
- The quartz top can be cleaned using standard marble cleaning agents available at local suppliers.
- Avoid using abrasive or acidic cleaners, as these may damage the surface of the top.
Touch-Up Pen Usage
- If the vanity develops scratches or minor blemishes, use the touch-up pen (AA) included in the package.
- Stroke the pen in the direction of the scratch, and remove excess colorant immediately with a soft cloth.
Conclusion
Allen + Roth's 36-inch and 60-inch vanities with tops are designed with the DIY user in mind, offering a streamlined installation process and a durable, aesthetically pleasing design. By following the detailed instructions and safety precautions provided in the manufacturer's documentation, users can ensure a smooth and successful installation. Proper care and maintenance will help extend the life of the vanity and maintain its appearance for years to come. These models are ideal for those seeking a cost-effective yet high-quality solution for bathroom renovations, especially when installed with the help of a second person and the right tools.